Header banner

<< Previous Thread 3dworld camera batterries Next Thread >>

Subject: 3dworld camera batterries
Date: 2007-10-02 19:43:37
From: dale yingst
I'm going to a mountain resort this weekend with the best rock climbing
on the East coast. I am taking my 3Dworld camera and hope finally to
give it a good workout. I want to change the batteries that came with
it. The manual says 1.55V silver -oxide but they are Chinese batteries
and I am not sure what their Eveready or Duracell equivalents would be.
Any help. I know that with my Fed cameras, it was important to have the
proper battery for accurate meter readings.

Thanks,

Dale Yingst
Subject: Re: 3dworld camera batteries
Date: 2007-10-02 21:43:36
From: John Thurston
dale yingst wrote:

> ... I want to change the batteries that came with
> it [TL120-1]. The manual says 1.55V silver -oxide
> but they are Chinese batteries and I am not sure
> what their Eveready or Duracell equivalents would be.

Mine came with 357S batteries
http://stereo.thurstons.us/compared.htm
and that is what I'd replace 'em with.

If I was in need and couldn't come up with 357s
batteries, I'd take anything else silver that
produced 1.55V and physically fit.
________________________________________
John Thurston
Juneau, Alaska
http://stereo.thurstons.us
Subject: Re: 3dworld camera batterries
Date: 2007-10-03 07:08:19
From: David W. Kesner
Dale Yingst writes:

> manual says 1.55V silver -oxide but they are Chinese batteries and I am
> not sure what their Eveready or Duracell equivalents would be

I am using Energizer 357/303.

Thanks,

David W. Kesner