Header banner

<< Previous Thread Concept for the TL120 lens board Next Thread >>

Subject: Concept for the TL120 lens board
Date: 2008-02-13 00:54:40
From: John Thurston
Here are a couple images of how I think the lens board might
appear:

http://www.alaska.net/~thurston/images/backofboard.gif
http://www.alaska.net/~thurston/images/frontofboard.gif

I _think_ they will cost about $100. That depends mostly on
getting the quantity to something greater than one :) My
current concept uses aluminum to keep the cost and weight down.

You'd have to BYOL (bring your own lenses). The result is a
55mm camera focused at hyperfocal for f/22.

I have a concept for incorporating focus, but I really doubt
it would scale to any quantity greater than one as it
involves parting out three additional cameras to get their
focusing gears :(
________________________________________
John Thurston
Juneau, Alaska
http://stereo.thurstons.us
Subject: Re: Concept for the TL120 lens board
Date: 2008-02-13 12:17:02
From: chrisjachner
> I _think_ they will cost about $100. That depends mostly on
> getting the quantity to something greater than one :) My
> current concept uses aluminum to keep the cost and weight down.
>
> You'd have to BYOL (bring your own lenses). The result is a
> 55mm camera focused at hyperfocal for f/22.

Hi John! This sounds pretty good to me! So, once again, I´ll will join
this project with one lens board for my TL120, if you should start the
production! Please keep us informed! Kind regards, Chris