Header banner

<< Previous Thread Mounting Jig 3dWorld Next Thread >>

Subject: Mounting Jig 3dWorld
Date: 2008-09-19 05:23:12
From: arclotet
Positionig back the Focusing Adjusting Module and Viewing Lenses makes
the Jig to fall back.

The Light box and side grips alone are to light to hold it in vertical
position.

I use tu place some object behind the JIg to prevent the falling back.

Any tip to settle this in other way.

Thanks
Antonio
Subject: Re: Mounting Jig 3dWorld
Date: 2008-09-19 10:52:56
From: John Thurston
arclotet wrote:
> Positionig back the Focusing Adjusting Module and Viewing Lenses makes
> the Jig to fall back.
>
> The Light box and side grips alone are to light to hold it in vertical
> position.
>
> I use tu place some object behind the JIg to prevent the falling back.
>
> Any tip to settle this in other way.

I would consider:

A) adding weight to the bottom of the pivoting part of the jig.

B) wedging a piece of foam between the pivoting part and the
base. I would probably us open-cell foam for this.


--
John Thurston
Juneau Alaska
http://stereo.thurstons.us