Header banner

<< Previous Thread MF3D Sleeves are here Next Thread >>

Subject: MF3D Sleeves are here
Date: 2010-11-10 22:17:44
From: John Thurston
I have had a new run of "Sam Smith" seamless sleeves made for
my own use and I am offering the excess for sale here. The
last time these were available was in 2007.

These are not the least expensive sleeves you will ever find,
but I don't think you will find a better product. These are
highly transparent, 3mil, seamless sleeves which are suitable
for use on 80x132 cardboard as well as 80x140 plastic mounts.

I'm only prepared to ship these by mail and the costs
(including postage in the US) are as follows:
100 $41.46
200 $77.48
300 $117.61
400 $152.59
500 $182.43
600 $210.22
700 $228.74
800 $251.38
900 $271.96
1000 $290.48

I have not pre-computed a Canadian or over-seas price. This
isn't because I don't love you, it is just because there are
an awful lot of possible countries to compute for. I will
_happily_ ship any where I can mail. Let me know where you
are and I'll figure out the postage to get it to you. All I
ask is that you pay me in USD.

You will notice the "odd" pricing. Pricing things at 74 cents
isn't good retail practice, but this is all spread-sheet
calculated. I'm not aiming for retail price-points, I'm
recovering my costs and offering a discount for quantity.

Again, these are not inexpensive, but they _are_ a superior
product. If you would like a couple samples to see how they
stack up, drop me a note OFF-LIST with your mailing address.
________________________________________
John Thurston
Juneau, Alaska
http://stereo.thurstons.us
Subject: Re: MF3D Sleeves are here
Date: 2010-11-11 14:30:29
From: bob@chairboy.com
Hi John,

I don't have access to the email I sent you earlier, but I'll take at least as
many as I said I would. I think I may have asked for 600. It looks like there
is an inconsistent price break between 600 and 700, so I would up the quantity
to 700 if that is not a typo.

I have a self-imposed deadline of printing, mounting, and matting images for
my show in Portland. I'm trying to get as much done as possible before my club
meets on Saturday because Mart McCann will be able to take them down to the 3D
Center for me. As a result, I've been working round the clock and have not yet
sent off your camera. I will check with you again before I take it to FedEx.

thanks,
Bob

Quoting John Thurston <juneau3d@thurstons.us>:

> I have had a new run of "Sam Smith" seamless sleeves made for
> my own use and I am offering the excess for sale here. The
> last time these were available was in 2007.
>
> These are not the least expensive sleeves you will ever find,
> but I don't think you will find a better product. These are
> highly transparent, 3mil, seamless sleeves which are suitable
> for use on 80x132 cardboard as well as 80x140 plastic mounts.
>
> I'm only prepared to ship these by mail and the costs
> (including postage in the US) are as follows:
> 100 $41.46
> 200 $77.48
> 300 $117.61
> 400 $152.59
> 500 $182.43
> 600 $210.22
> 700 $228.74
> 800 $251.38
> 900 $271.96
> 1000 $290.48
>
> I have not pre-computed a Canadian or over-seas price. This
> isn't because I don't love you, it is just because there are
> an awful lot of possible countries to compute for. I will
> _happily_ ship any where I can mail. Let me know where you
> are and I'll figure out the postage to get it to you. All I
> ask is that you pay me in USD.
>
> You will notice the "odd" pricing. Pricing things at 74 cents
> isn't good retail practice, but this is all spread-sheet
> calculated. I'm not aiming for retail price-points, I'm
> recovering my costs and offering a discount for quantity.
>
> Again, these are not inexpensive, but they _are_ a superior
> product. If you would like a couple samples to see how they
> stack up, drop me a note OFF-LIST with your mailing address.
> ________________________________________
> John Thurston
> Juneau, Alaska
> http://stereo.thurstons.us
>
Subject: Re: MF3D Sleeves are here
Date: 2010-11-11 14:49:47
From: bob@chairboy.com
oops. Just meant for John.

Bob

Quoting bob@chairboy.com:

> Hi John,
>
> I don't have access to the email I sent you earlier, but I'll take at
> least as
> many as I said I would. I think I may have asked for 600. It looks like
> there
> is an inconsistent price break between 600 and 700, so I would up the
> quantity
> to 700 if that is not a typo.
>
> I have a self-imposed deadline of printing, mounting, and matting images
> for
> my show in Portland. I'm trying to get as much done as possible before
> my club
> meets on Saturday because Mart McCann will be able to take them down to
> the 3D
> Center for me. As a result, I've been working round the clock and have
> not yet
> sent off your camera. I will check with you again before I take it to
> FedEx.
>
> thanks,
> Bob
>
> Quoting John Thurston <juneau3d@thurstons.us>:
>
> > I have had a new run of "Sam Smith" seamless sleeves made for
> > my own use and I am offering the excess for sale here. The
> > last time these were available was in 2007.
> >
> > These are not the least expensive sleeves you will ever find,
> > but I don't think you will find a better product. These are
> > highly transparent, 3mil, seamless sleeves which are suitable
> > for use on 80x132 cardboard as well as 80x140 plastic mounts.
> >
> > I'm only prepared to ship these by mail and the costs
> > (including postage in the US) are as follows:
> > 100 $41.46
> > 200 $77.48
> > 300 $117.61
> > 400 $152.59
> > 500 $182.43
> > 600 $210.22
> > 700 $228.74
> > 800 $251.38
> > 900 $271.96
> > 1000 $290.48
> >
> > I have not pre-computed a Canadian or over-seas price. This
> > isn't because I don't love you, it is just because there are
> > an awful lot of possible countries to compute for. I will
> > _happily_ ship any where I can mail. Let me know where you
> > are and I'll figure out the postage to get it to you. All I
> > ask is that you pay me in USD.
> >
> > You will notice the "odd" pricing. Pricing things at 74 cents
> > isn't good retail practice, but this is all spread-sheet
> > calculated. I'm not aiming for retail price-points, I'm
> > recovering my costs and offering a discount for quantity.
> >
> > Again, these are not inexpensive, but they _are_ a superior
> > product. If you would like a couple samples to see how they
> > stack up, drop me a note OFF-LIST with your mailing address.
> > ________________________________________
> > John Thurston
> > Juneau, Alaska
> > http://stereo.thurstons.us
> >
>