Header banner

MF3D-group Conversations Photos Files All groups About
<< Previous Thread Anyone else have the TL120 10 slide drum viewer - error -2 Next Thread >>

Subject: Anyone else have the TL120 10 slide drum viewer - error -2
Date: 2014-05-20 11:58:16
From: blackiceuk

Hi


First off seeing if anyone in the UK has one besides me? Secondly for a wider audience/owners - any idea what -2 error is?


Can't find my manual at moment. 


Cheers


Mark 

Subject: Re: Anyone else have the TL120 10 slide drum viewer - error -2
Date: 2014-05-21 20:27:34
From: Kevin Keating
Mark,
In the manual it says -2 is a rotary part exception area. Here is quote from manual for solutions,
 
1) Under the circumstance of without picture plate. after this machine is connect with the power,the electrical machinery should turn discontinuously,if it doesn't turn, the electrical machinery must be without the power supply or damaged.
 
2) Under the circumstance of the picture plate is fixed normally and the lever is in the "lock" state. If the picture plate if doesn't turning, please check the friction wheel or the picture plate if blocked by sundries or stained oil ect,: If the picture plate turning continuously, the light-coupling must be damaged, please contact the dealer.
 
Hope that helps,
Kevin
From: "blackice@pavilion.co.uk [MF3D-group]"
To: MF3D-group@yahoogroups.com
Sent: Tuesday, May 20, 2014 10:58 AM
Subject: [MF3D-group] Anyone else have the TL120 10 slide drum viewer - error -2

 
Hi

First off seeing if anyone in the UK has one besides me? Secondly for a wider audience/owners - any idea what -2 error is?

Can't find my manual at moment. 

Cheers

Mark 


Subject: Re: Anyone else have the TL120 10 slide drum viewer - error -2
Date: 2014-05-22 04:37:16
From: blackiceuk
Ok - sort of makes sense. 

How do you interpret this chinese-glish so I get it 100%?

M
Subject: Re: Anyone else have the TL120 10 slide drum viewer - error -2
Date: 2014-05-22 16:14:09
From: Kevin Keating
Mark,
It must be the light sensor that stops each frame for viewing that might need cleaning with airbrush.
Kevin
On Thursday, May 22, 2014 3:39 AM, "blackice@pavilion.co.uk [MF3D-group]" wrote:


 
Ok - sort of makes sense. 

How do you interpret this chinese-glish so I get it 100%?

M


Subject: Re: Anyone else have the TL120 10 slide drum viewer - error -2
Date: 2014-05-23 17:03:18
From: stereomirrors
This looks like the light coupling sensor, same # as the one in mine "TP807"
http://www.aliexpress.com/item/Free-shipping-10PCS-TP807/1656480877.html

 



Subject: Re: Anyone else have the TL120 10 slide drum viewer - error -2
Date: 2014-05-25 05:20:43
From: blackiceuk
any idea where this is in the viewer. Its at the gallery so will need to revisit it with key in hand. 

M
Subject: Re: Anyone else have the TL120 10 slide drum viewer - error -2
Date: 2014-05-27 23:46:45
From: stereomirrors

 

The sensor is located just to the right of the rubber wheel that turns the drum that you lock and unlock by the lever to remove the drum when you want to remove from machine to change pictures,and the inner part of the drum fits in between each end of the sensor and there is 10 sloted gaps in the drum there on that inner wheel so the picture will stop for viewing when the light goes through the slot so if dirty from a dusty enviorment that could be the cause of your error,( if the light isn't being tranmitted through the sensor.)

Subject: Re: Anyone else have the TL120 10 slide drum viewer - error -2
Date: 2014-05-28 01:57:10
From: blackiceuk
cheers, I forgot the keys yesterday so will loop by today and have a look and a well placed 'blow' as it were.

M