Subject: Fwd: [MF3D-group] Digest Number 1300[1 Attachment]Date: 2014-08-02 11:02:20From: Steven Lederman
Gary Cullen could most likely fix the camera if it hasn't been remedied yet.
Regards,
Steven
Begin forwarded message:
From: Gary Cullen <tatragary@gmail.com>
Date: August 2, 2014 at 11:43:27 AM ADT
To: Steven Lederman <gongadin@rogers.com>
Subject: Re: [MF3D-group] Digest Number 1300[1 Attachment]Hi Steven, usually you just pull hard on the open cartridge and shake the camera back and forth with lenses facing up to unstick a holder. But if someone tried to force it closed and bent a holder then they may have a bigger problem. I'd have to see it now to figure it out as I don't have one of those any more to check out.GaryOn Fri, Aug 1, 2014 at 4:18 AM, Steven Lederman <gongadin@rogers.com> wrote:
Hi, Gary!I thought I'd forward this to you in case you can repair the problem.Regards,Steven
Begin forwarded message:From: MF3D-group@yahoogroups.com
Date: August 1, 2014 at 4:38:13 AM ADT
To: MF3D-group@yahoogroups.com
Subject: [MF3D-group] Digest Number 1300[1 Attachment]
Reply-To: "No Reply"<notify-dg-MF3D-group@yahoogroups.com>1 Message
Digest #1300
Message
Thu Jul 31, 2014 7:39 am (PDT) . Posted by:
"George Themelis" gathemelis
Can someone help this gentleman?
George
From: Gordon Hastings
Sent: Wednesday, July 30, 2014 8:33 PM
To: drt-3d@live.com
Subject: Jules Richard Stereo Camera
Hello,
I have the camera pictured on the attached photographed. The magazine was pulled out without holding the camera level to keep the plate holders from shifting and now it cannot be closed. Can you repair it ? Please advise.
Many thanks,
Gordon
Attachment(s) from George Themelis1 of 1 Photo(s)