As predicted, it has taken a long time to get these sleeves
made. I think I have sent emails to everyone who expressed
interest back in July. If you did, and didn't get a personal
email from me today, please let me know _off list_.

When I have met the needs of those early folks, I will
announce general availability here. That announcement will
include costs.

--
John Thurston
Juneau, Alaska

On 11/25/2018 4:57 PM, John Thurston juneau3d@thurstons.us
[MF3D-group] wrote:
. . .

> When I have met the needs of those early folks, I will
> announce general availability here. That announcement will
> include costs.

If you want protective sleeves for your MF3D slides, they
are available again. These are not the least expensive
sleeves you will ever find, but I don't think you will find
a better product. These are highly transparent, 3mil,
seamless polyester (mylar) sleeves which are suitable for
use on 80x132 cardboard as well as 80x140 plastic mounts.
These will be "seamless" sleeves identical to those I
offered in 2017, 2012, 2010, and Sam offered in 2007. If you
would like a sample, please contact me OFF LIST and I'll
mail you a couple.

It has taken a long time to get these sleeves made. The cost
is lower* than I estimated back in July (and extremely
similar to 2016 pricing). The following prices include
postage in the US. Talk to me for postage to other countries**.

Quant Cost
100 $40.25
200 $77.75
300 $110.00
400 $143.50
500 $172.50
600 $205.25
700 $231.00
800 $263.00
900 $301.50
1000 $333.50

If you want sleeves, send me a note OFF LIST with the
quantity you would like, and your mailing address. I'll send
you a pay-pal link*** for the appropriate amount.




* I'm doing this with cost-recovery pricing. The more you
buy, they cheaper they are. Some quick division will show
those range in cost per sleeve between 0.40 (for 100), and
0.33 (for 1,000).

** International postage can be expensive, but I'll do
everything I can to package and parcel them into the most
cost-effect form.

*** If you'd rather pay me with greenbacks, check, or gold
doubloons, let me know and I'm happy to work with you. In
lieu of dollars, I'll even consider a trade for MF3D images.

--
John Thurston
Juneau Alaska
http://stereo.thurstons.us

On 11/28/2018 1:40 PM, John Thurston juneau3d@thurstons.us
[MF3D-group] wrote:

> On 11/25/2018 4:57 PM, John Thurston juneau3d@thurstons.us
> [MF3D-group] wrote:
> .. . .
>> When I have met the needs of those early folks, I will
>> announce general availability here. That announcement will
>> include costs.
>
> If you want protective sleeves for your MF3D slides, they
> are available again. These are not the least expensive
> sleeves you will ever find, but I don't think you will find
> a better product.

I think I have have now mailed sleeves out to everyone who
has requested them. They should all be delivered by the end
of this week.

If you asked for sleeves and I haven't given you a link
requesting payment, then something is wrong. Drop me another
note and we'll straighten it out.

If you've asked for sleeves, sent me money, and don't have
your package by Dec 7th, then I've done something wrong.
Drop me a note and I'll straighten it out.

Having handled all currently interested parties, I now have
a moderate inventory for future sales. I'll probably mention
them again in about a year. If you find this in the archives
and want sleeves before then, feel free to drop me a note
and I'll set ya' up.


--
John Thurston
Juneau Alaska
http://stereo.thurstons.us

Thank you John, for going to all this trouble. I didn't need any more this time around, but I certainly appreciate when somebody steps up like this. What a great hobby.

I completely agree with Timo. Thanks John, your efforts are much appreciated!